Makino, as a specialist in crushing, filtration, and drying, supports manufacturing in a wide range of fields, from industry to the environment.

Spray Dryer:Drying

Drying

A dryer producing high-quality granular products

Features

Short drying time

Spraying the slurry creates a large surface area in contact with hot air and makes time for drying and
granulation short so that thermal alteration of products is minimized.


Product collection

  • Only spherical and good-flowable granular products are efficiently collected.
  • Combined with a cyclone separator, fine powder can be collected.
  • Powder contact parts inside the drying tower have a mirror finish treatment,
    less dried product adheres to them.

Spraying system

  • There are two types of spraying systems, a disc type and a nozzle type.

As for a nozzle type, either a pressurized type or a two-fluid type can be selected,
depending on the particle size and its throughput.

  • Pressurized type
  • Two-fluid type

As for a disc type, either a pin type or a hole type can be chosen, depending
on the particle size and its throughput.

  • Pin type
  • Hole type

It is used for:
  • Ceramics
  • Electronic parts
  • Ferrite
  • Detergents
  • Powdered milk
  • Medicines
  • Flavors
  • Health foods, etc.

System flow Pre-processing and post-processing

Pre-processing and post-processing

Overall dimensions

Specifications

Disc type
Model Water evaporation
capacity (kg/hr)
Tower diameter A
(mm)
Tower height B
(mm)
Overall dimensions
L × W × H (mm)
MSD-10D 1 1000 1500 1700 × 1400 × 2500
MSD-12D 3 1200 1800 2500 × 2000 × 3500
MSD-16D 5 1600 2400 4500 × 3000 × 5000
MSD-20D 10 2000 2900 7000 × 4500 × 6000
MSD-30D 30 3000 4400 8000 × 5500 × 7000
MSD-40D 70 4000 5900 10000 × 6500 × 9000
MSD-50D 140 5000 7300 13000 × 8500 × 11000
MSD-60D 230 6000 8800 13600 × 9500 × 12500

Specifications and sizes are subject to change without notice.

Nozzle type
Model Water evaporation
capacity (kg/hr)
Tower diameter A
(mm)
Tower height B
(mm)
Overall dimensions
L × W × H (mm)
MSD-125N 125 3800 9300 8500 × 5000 × 12500
MSD-500N 500 4600 11100 13000 × 7000 × 15700
MSD-1000N 1000 5300 12300 15500 × 7500 × 17200
MSD-1500N 1500 6100 13500 17000 × 9000 × 19000
MSD-2000N 2000 6800 14200 18000 × 10500 × 19700
MSD-3000N 3000 7600 14900 20000 × 11000 × 21000

Specifications and sizes are subject to change without notice.

Products TOP

マキノのコア技術からも製品情報をご覧頂けます

Copyright © MAKINO Corporation All Rights Reserved.
Powered by WordPress & BizVektor Theme by Vektor,Inc. technology.