A world’s leading maker of press machines for hard metal.
Features
- Press machine for hard metal is capable of pressing from large to small diameter.
- Precisely controlled delivery of hydraulic oil into the cylinder realizes very slow operation for stable
pressing of high-precision, high-quality products. - Pressed rods are cut to a programmed length by a cutting device, then moved to cassettes by the
deposition device. - The deposition device uses compressed air to lift the rods and unload them smoothly with little
friction. - A touch screen operation allows an operator to easily set and modify the extrusion conditions.
- Pressing of hard metal rods
Specifications (example)
| Material container | (mm) | ⌀80 × 800 |
|---|---|---|
| Pressing thrust | (kN) | 750 (Hydraulic unit with maximum pressure of 15 MPa) |
| Extrusion control | (mm/sec) | Piston speed: forward 0-50, backward 0-100 |
| Pressing die | (mm) | ⌀5 ～ ⌀20 |
| Cut length | (mm) | 200 ～ 1000 |
| Power | (kW) | 25 (Varies according to specified conditions) |
| Dimensions L × W × H | (mm) | 2300 × 6000 × 2200 |
| Weight | (kg) | 9000 |
We design machines as per your products.
The specifications and dimensions are subject to change without notice.
